Scorpio HD Mini Remote Control Head

MINI SCORPIO HEAD HD is a 2-axis and 3-axis remote‑controlled pan/tilt head designed for video, HD, and film cameras. The Mini Scorpio Head can be controlled via an RS485 cable series or through a wireless half‑duplex 2.4 GHz microwave link developed by Servicevision, with a maximum range of 500 meters. All axes—pan, tilt, and roll—as well as focus, aperture, and zoom are programmable and repeatable. The system features six memory banks, each capable of storing up to two minutes of settings. Within these memories, you can independently adjust each axis.

Alpha Dolly Alpha Track Vehicle

The AlphaDolly is a motorized dolly powered by standard camera battery packs. It is a lightweight, compact, and highly maneuverable system featuring a low initial column height of 710 mm (27.95 inches) and a completely new, streamlined design. Operating the dolly requires only three standard lithium‑ion batteries (14.4 V/10–15 A), providing exceptional flexibility and independence in terms of power supply. The new seating position on the tower replicates the familiar operating workflow of hydraulic lift‑arm dollies. Seat height can be adjusted using seat‑arm adapters of varying lengths and a newly designed telescoping seat arm. Additionally, an integrated 360° rotation system allows the camera operator to swivel along with the column. The AlphaDolly system is compatible with numerous standard MovieTech accessories.

Super Falcon II Orbital Vehicle

The Super Falcon II is a professional dolly designed specifically for operators and photographers. This product boasts high stability, ease of operation, convenient management, and versatile functionality, with minimal maintenance requirements. Built to be robust and durable, the Super Falcon II can be used in virtually any environment. The dolly comes equipped with two types of wheels: standard, high‑quality hard‑rubber wheels that roll smoothly on studio floors or standard tracks; and hybrid tires, which combine hard rubber with inflatable rubber components, ensuring seamless travel on all surfaces—even those that are not perfectly smooth. The steering mode can be quickly switched between a four‑wheel “crab‑walk” configuration, a two‑wheel “traditional” setup, or back to the crab‑walk mode simply by twisting the steering lever. In “rotation” mode, the rear wheels feature a highly advanced gear‑driven steering system. To remove the steering column, unscrew the threaded base ring and the drive shaft. When necessary, a release mechanism at the base of the steering column allows the steering unit to be locked in place. The Super Falcon II’s vertical lift arm maintains precise camera alignment throughout its entire range of motion. A 90° mounting plate can be attached to the platform, enabling operators to work from exceptionally low positions. The accumulator can be recharged manually or electrically—via a pump motor connected to a mains‑powered cable activated by a switch. Once the preset pressure is reached, the motor automatically shuts off. In both cases, this specialized device effectively prevents over‑pressurization damage. Additionally, the Super Falcon II features newly installed pistons, implemented as “buffers.”

Ronford-Baker sliding rail

Ronford-Baker’s slide rail offers ultra-precise slides in lengths ranging from 25” to 96”. This slide rail is a CNC‑machined product, crafted from high‑strength aluminum with pressure‑relieved die‑cast components and anodized finish. For maximum portability, the rail stands just 12 cm tall and measures 25 cm in overall width when fitted to Mitchell rails. The entire assembly features a 360° lockable swivel.

Ronford-Baker heavy-duty tripod

Ronford-Baker heavy-duty tripod

P90 Pedestal Lift Platform

The CARTONI P90 two-stage lift is designed for a wide range of applications, capable of supporting camera–lens combinations weighing up to 90 kg (198 lb), and suitable for all studio and live‑broadcast setups.

Pedestal P70+

The CARTONIP70+ is a portable, compact lifting platform designed for both studio and on‑location use. Its exceptional stability and lightweight design make it an ideal match for camera–lens setups weighing no more than 55 kg (121 lbs). The inflatable, shoot‑up style lifting column can be deployed quickly and safely: it can be inflated manually or with a compressor, and features a safety valve to prevent over‑inflation. Its innovative design delivers outstanding stability and vibration‑free control while enabling smooth, precise movement. When the platform is fully extended, precise camera balancing can be achieved by simply releasing excess air pressure through the release valve. At 125 PSI, the column supports a maximum load of 75 kg (162 lbs). The foldable dolly comes equipped with six positioning locks, each featuring a 125‑mm dual wheel with a foot‑activated brake, as well as a cable guard that ensures effortless, directional mobility. A dual‑clamp fastening system securely anchors the lifting column to the dolly, easily engaged via two ergonomically designed locking levers. Optionally, a set of 200‑mm pneumatic casters with wheel brakes is available for outdoor shooting applications.

Airfloater

The patented Airfloater pan‑tilt head, manufactured in Italy under license from CARTONI, is designed to prevent strain on photographers’ backs and shoulders, mimicking active shoulder‑style shooting while delivering a practical field of view and unrestricted movement. Even when mounted with the heaviest cameras, the Airfloater handles and operates with ease. You can lock the tilt angle using the red knob and shoot with 360° panning and 18° tilting in any direction. The Airfloater offers multiple mounting options: Chapman/Whitworth bolts, a four‑hole Arca‑Suiß plate interface, and a 300 mm Mitchell plate secured with a wing nut. Its platform features a quick‑release European‑style base. The Airfloater’s dimensions are nearly identical to those of conventional hydraulic heads.

Lambda 50 Third Axis

Both the pan and tilt modes of the Lambda50 hydraulic head are equipped with CARTONI’s patented, registered hydraulic damping control system. To enable rotation about the third axis, the Lambda50 hydraulic head features a third set of additional damping controls, offering seven levels of adjustment and a zero‑position lock.

Lambda 50

The award-winning LAMBDANoda gimbal is the only one that allows you to set the node position on any camera and perform 360° pan, tilt, and roll around the axis, all while keeping the focal plane of any camera perfectly aligned. Adjustments are made by smoothly sliding the micrometer crank in both horizontal and vertical directions, delivering exceptionally high precision. When the slider’s travel is insufficient, an intelligent system with an adjustable counterweight bar can be activated. The Lambda50 gimbal can be mounted on any conventional support—such as a tripod or pulley—or installed as a suspended rig on cranes and jibs. Optional accessories include a third axis, an adjustable rocker arm, a steering wheel, an eyepiece holder, and a counterweight bar, enabling you to configure the gimbal into a highly versatile setup.

Lambda 25 Third Axis

The Lambda25’s third axis enables nodal positioning on three rotational axes, effectively enclosing the system within a spherical configuration. It can be mounted on the Lambda25 gimbal by simply disassembling two L‑shaped brackets and inserting the Dutch axis in the center. This makes it an ideal droop‑compensation device for use on trolleys or cranes. Two 1‑kg counterweights are included as part of the Lambda25 third‑axis kit.

Lambda 25

The innovative, lightweight Lambda25 provides an ideal gimbal solution for cameras weighing 25 kg (55 lbs) or less. Building on the proven features of the classic LAMBDA series gimbals, it incorporates a perforated pan‑tilt axis that accommodates cable routing and enables unrestricted 360° rotation. Its patented CARTONI fluid‑damping system delivers smooth, continuous operation on both axes. The Lambda25 can be mounted on any standard support—such as a tripod or dolly—or deployed in suspended configurations on cranes, jibs, and dollies.

Maxima 5.0

The new Maxima 5.0 is the latest pan‑tilt head designed for heavy‑duty digital cinematography. Its groundbreaking patented balancing system can handle payloads of up to 50 kg, achieving “perfect balance” across the full 180° tilt range. A proprietary continuous hydraulic damping system delivers everything from nearly inertial glide to exceptionally smooth, stable drag, ensuring maximum versatility and flawless diagonal shooting. The Maxima 5.0’s knobs and levers are ergonomically engineered to provide effortless operation in any setting—whether in the studio, on location, or during outdoor shoots. Damping performance and balance settings are monitored via a large digital display. A spacious sliding camera wedge is compatible with Arri, Sony, and O’Connor rails. The head comes complete with a telescoping pan bar and a short front pan bar. Featuring a classic Mitchell base, the Maxima 5.0 interfaces with all flat‑base Mitchell tripods and platforms. An optional, user‑friendly 150 mm ball‑mount base is also available.

Maxima 30

The ultimate in innovation, the CARTONI hydraulic head is designed specifically for today’s digital cinematography. Its hydraulic damping on both the pan and tilt axes ensures exceptionally smooth movement across an almost inertia‑free glide to rock‑solid maximum resistance, with pinpoint precision in start‑up and stop. The renowned “wing” balancing system can support cameras ranging from 3 kg (7 lbs) to 30 kg (66 lbs), achieving perfect balance within a ±90° range; moreover, with a center of gravity positioned at 100 mm, the head can handle payloads of up to 40 kg (88 lbs). The Maxima30 incorporates all the acclaimed features of CARTONI’s MAXIMA series hydraulic heads, yet in a more compact form, weighing just 0.5 kg (23 lbs). For ease of use, it boasts a digital balance readout, an intuitive pan‑and‑tilt motion control system, and an illuminated bubble level. To maximize user convenience, the head is equipped with left‑side pan and tilt hand brakes that also serve as camera wedge locks—activatable with one hand to disengage the new safety lock and fully release the camera. The camera wedge accepts all industry‑standard plates, such as those from ARRI, RED, and others, with a 140 mm sliding range and clear scale markings; it also includes four compass‑style connectors for the pan bar, and comes standard with a right‑hand telescoping pan bar and a left‑hand front pan handle.

Flowcine X-Arm Shock Absorbing Arm

The FlowcineX‑A Arm shock‑absorbing arm, xARM, is a dual‑section, hinged shock absorber crafted from aerospace‑grade aluminum, solid carbon fiber with titanium‑infused shafts, and large, precision stainless‑steel ball bearings. Its design is both minimalist and robust, capable of supporting up to 29 kg/64 lbs. With its clean, streamlined aesthetic, the arm operates frictionlessly and silently throughout its full range of motion. All mounting blocks are made from stainless‑steel connectors rigorously tested in the film industry, while many other components—including the column and shaft—are constructed from Grade 5 titanium. The xARM features a polymer spring core encased in neoprene. Each shock‑absorbing spring delivers smooth, linear lifting performance, optimizing when used near its maximum capacity. Operators can fine‑tune settings for peak results. Equipped with three distinct spring options, the xARM accommodates payloads ranging from 17 to 29 kg/37 to 64 lbs, and the springs can be swapped out quickly. By enabling operators to maintain any position with minimal effort, the xARM introduces fresh operational concepts and inspires new ways of working—allowing for fluid, seamless motion.

Flowcine xSPINE VEST

The xSPINE vest is Flowcine’s world‑first universal vest designed specifically for photographers, offering versatile applications. Currently, the xSPINE can be used in Steadicam™ operations, supporting a variety of front‑ and rear‑mounted configurations. Photographers can also attach gimbal support systems, such as Flowcine’s GLINK mount. In the future, Flowcine will introduce additional mounting options and accessories. Weighing just 3.9 kg, the xSPINE has been engineered to be both comfortable and robust. Its padding features a dual‑layer air‑mesh system that ensures excellent breathability, while memory foam further enhances wearing comfort. All components are crafted from durable carbon fiber and lightweight aluminum, creating a sturdy support frame that evenly distributes body weight for optimal comfort. Key sections—including the front, back, and sides—can be quickly detached and disassembled, allowing the vest to be packed down into a more compact size. Every component is fully adjustable to accommodate photographers of different builds. The carbon‑fiber strip on the front of the vest is contoured to promote unrestricted breathing, making it an ideal choice for users of all body types. At the front of the xSPINE, a dual‑locking trapezoidal strap adjustment system enables photographers to make swift, precise adjustments. Either side of the vest can be opened or closed, with a robust buckle design that prevents accidental release. Even under load, photographers can safely open the buckle to make adjustments or fine‑tune the fit during breaks.